--- /dev/null
+'\" t
+.\" Title: anytun-config
+.\" Author: [see the "AUTHORS" section]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\" Date: 12/14/2009
+.\" Manual: anytun-config user manual
+.\" Source: anytun 0.3.2
+.\" Language: English
+.\"
+.TH "ANYTUN\-CONFIG" "8" "12/14/2009" "anytun 0.3.2" "anytun-config user manual"
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+anytun-config \- anycast tunneling configuration utility
+.SH "SYNOPSIS"
+.sp
+.nf
+\fBanytun\-config\fR
+ [ \fB\-h|\-\-help\fR ]
+ [ \fB\-L|\-\-log\fR <target>:<level>[,<param1>[,<param2>[\&.\&.]]]
+ [ \fB\-r|\-\-remote\-host\fR <hostname|ip> ]
+ [ \fB\-o|\-\-remote\-port\fR <port> ]
+ [ \fB\-4|\-\-ipv4\-only\fR ]
+ [ \fB\-6|\-\-ipv6\-only\fR ]
+ [ \fB\-R|\-\-route\fR <net>/<prefix length> ]
+ [ \fB\-m|\-\-mux\fR <mux\-id> ]
+ [ \fB\-w|\-\-window\-size\fR <window size> ]
+ [ \fB\-k|\-\-kd\-prf\fR <kd\-prf type> ]
+ [ \fB\-e|\-\-role\fR <role> ]
+ [ \fB\-E|\-\-passphrase\fR <pass phrase> ]
+ [ \fB\-K|\-\-key\fR <master key> ]
+ [ \fB\-A|\-\-salt\fR <master salt> ]
+.fi
+.SH "DESCRIPTION"
+.sp
+\fBanytun\-config\fR writes routing/connection table entries, that can be read by \fBanytun\-controld\fR\&.
+.SH "OPTIONS"
+.PP
+\fB\-L, \-\-log <target>:<level>[,<param1>[,<param2>[\&.\&.]]]\fR
+.RS 4
+add log target to logging system\&. This can be invoked several times in order to log to different targets at the same time\&. Every target hast its own log level which is a number between 0 and 5\&. Where 0 means disabling log and 5 means debug messages are enabled\&.
+
+The file target can be used more the once with different levels\&. If no target is provided at the command line a single target with the config
+\fBsyslog:3,anytun\-config,daemon\fR
+is added\&.
+
+The following targets are supported:
+.PP
+\fBsyslog\fR
+.RS 4
+log to syslog daemon, parameters <level>[,<logname>[,<facility>]]
+.RE
+.PP
+\fBfile\fR
+.RS 4
+log to file, parameters <level>[,<path>]
+.RE
+.PP
+\fBstdout\fR
+.RS 4
+log to standard output, parameters <level>
+.RE
+.PP
+\fBstderr\fR
+.RS 4
+log to standard error, parameters <level>
+.RE
+.RE
+.PP
+\fB\-r, \-\-remote\-host <hostname|ip>\fR
+.RS 4
+This option can be used to specify the remote tunnel endpoint\&. In case of anycast tunnel endpoints, the anycast IP address has to be used\&. If you do not specify an address, it is automatically determined after receiving the first data packet\&.
+.RE
+.PP
+\fB\-o, \-\-remote\-port <port>\fR
+.RS 4
+The UDP port used for payload data by the remote host (specified with \-p on the remote host)\&. If you do not specify a port, it is automatically determined after receiving the first data packet\&.
+.RE
+.PP
+\fB\-4, \-\-ipv4\-only\fR
+.RS 4
+Resolv to IPv4 addresses only\&. The default is to resolv both IPv4 and IPv6 addresses\&.
+.RE
+.PP
+\fB\-6, \-\-ipv6\-only\fR
+.RS 4
+Resolv to IPv6 addresses only\&. The default is to resolv both IPv4 and IPv6 addresses\&.
+.RE
+.PP
+\fB\-R, \-\-route <net>/<prefix length>\fR
+.RS 4
+add a route to connection\&. This can be invoked several times\&.
+.RE
+.PP
+\fB\-m, \-\-mux <mux\-id>\fR
+.RS 4
+the multiplex id to use\&. default: 0
+.RE
+.PP
+\fB\-w, \-\-window\-size <window size>\fR
+.RS 4
+seqence window size
+
+Sometimes, packets arrive out of order on the receiver side\&. This option defines the size of a list of received packets\' sequence numbers\&. If, according to this list, a received packet has been previously received or has been transmitted in the past, and is therefore not in the list anymore, this is interpreted as a replay attack and the packet is dropped\&. A value of 0 deactivates this list and, as a consequence, the replay protection employed by filtering packets according to their secuence number\&. By default the sequence window is disabled and therefore a window size of 0 is used\&.
+.RE
+.PP
+\fB\-k, \-\-kd\(emprf <kd\-prf type>\fR
+.RS 4
+key derivation pseudo random function
+
+The pseudo random function which is used for calculating the session keys and session salt\&.
+
+Possible values:
+.PP
+\fBnull\fR
+.RS 4
+no random function, keys and salt are set to 0\&.\&.00
+.RE
+.PP
+\fBaes\-ctr\fR
+.RS 4
+AES in counter mode with 128 Bits, default value
+.RE
+.PP
+\fBaes\-ctr\-128\fR
+.RS 4
+AES in counter mode with 128 Bits
+.RE
+.PP
+\fBaes\-ctr\-192\fR
+.RS 4
+AES in counter mode with 192 Bits
+.RE
+.PP
+\fBaes\-ctr\-256\fR
+.RS 4
+AES in counter mode with 256 Bits
+.RE
+.RE
+.PP
+\fB\-e, \-\-role <role>\fR
+.RS 4
+SATP uses different session keys for inbound and outbound traffic\&. The role parameter is used to determine which keys to use for outbound or inbound packets\&. On both sides of a vpn connection different roles have to be used\&. Possible values are
+\fBleft\fR
+and
+\fBright\fR\&. You may also use
+\fBalice\fR
+or
+\fBserver\fR
+as a replacement for
+\fBleft\fR
+and
+\fBbob\fR
+or
+\fBclient\fR
+as a replacement for
+\fBright\fR\&. By default
+\fBleft\fR
+is used\&.
+.RE
+.PP
+\fB\-E, \-\-passphrase <pass phrase>\fR
+.RS 4
+This passphrase is used to generate the master key and master salt\&. For the master key the last n bits of the SHA256 digest of the passphrase (where n is the length of the master key in bits) is used\&. The master salt gets generated with the SHA1 digest\&. You may force a specific key and or salt by using
+\fB\-\-key\fR
+and
+\fB\-\-salt\fR\&.
+.RE
+.PP
+\fB\-K, \-\-key <master key>\fR
+.RS 4
+master key to use for key derivation
+
+Master key in hexadecimal notation, e\&.g\&. 01a2b3c4d5e6f708a9b0cadbecfd0fa1, with a mandatory length of 32, 48 or 64 characters (128, 192 or 256 bits)\&.
+.RE
+.PP
+\fB\-A, \-\-salt <master salt>\fR
+.RS 4
+master salt to use for key derivation
+
+Master salt in hexadecimal notation, e\&.g\&. 01a2b3c4d5e6f708a9b0cadbecfd, with a mandatory length of 28 characters (14 bytes)\&.
+.RE
+.SH "EXAMPLES"
+.sp
+Add a client with Connection ID (Mux) 12 and add 2 Routes to this client
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+# anytun\-config \-w 0 \-m 12 \-K 0123456789ABCDEFFEDCBA9876543210 \-A 0123456789ABCDDCBA9876543210 \e
+ \-R 192\&.0\&.2\&.0/24 \-R 192\&.168\&.1\&.1/32 \-e server >> routingtable
+.fi
+.if n \{\
+.RE
+.\}
+.SH "BUGS"
+.sp
+Most likely there are some bugs in \fBAnytun\fR\&. If you find a bug, please let the developers know at satp@anytun\&.org\&. Of course, patches are preferred\&.
+.SH "SEE ALSO"
+.sp
+anytun(8), anytun\-controld(8), anytun\-showtables(8)
+.SH "AUTHORS"
+.sp
+Othmar Gsenger <otti@anytun\&.org> Erwin Nindl <nine@anytun\&.org> Christian Pointner <equinox@anytun\&.org>
+.SH "RESOURCES"
+.sp
+Main web site: http://www\&.anytun\&.org/
+.SH "COPYING"
+.sp
+Copyright (C) 2007\-2009 Othmar Gsenger, Erwin Nindl and Christian Pointner\&. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or any later version\&.
--- /dev/null
+'\" t
+.\" Title: anytun-controld
+.\" Author: [see the "AUTHORS" section]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\" Date: 12/14/2009
+.\" Manual: anytun-controld user manual
+.\" Source: anytun 0.3.2
+.\" Language: English
+.\"
+.TH "ANYTUN\-CONTROLD" "8" "12/14/2009" "anytun 0.3.2" "anytun-controld user manual"
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+anytun-controld \- anycast tunneling control daemon
+.SH "SYNOPSIS"
+.sp
+.nf
+\fBanytun\-controld\fR
+ [ \fB\-h|\-\-help\fR ]
+ [ \fB\-D|\-\-nodaemonize\fR ]
+ [ \fB\-u|\-\-username\fR <username> ]
+ [ \fB\-g|\-\-groupname\fR <groupname> ]
+ [ \fB\-C|\-\-chroot\fR <path> ]
+ [ \fB\-P|\-\-write\-pid\fR <filename> ]
+ [ \fB\-L|\-\-log\fR <target>:<level>[,<param1>[,<param2>[\&.\&.]]] ]
+ [ \fB\-f|\-\-file\fR <path> ]
+ [ \fB\-X|\-\-control\-host\fR < <host>[:port>] | :<port> > ]
+.fi
+.SH "DESCRIPTION"
+.sp
+\fBanytun\-controld\fR configures the multi\-connection support for \fBAnytun\fR\&. It reads a connection/routing table and outputs it via a tcp socket to all connected \fBAnytun\fR servers\&. When the control daemon is restarted with a new connection/routing table all \fBAnytun\fR servers automatically load the new configuration\&. Please make sure to protect that information as it contains the connection keys\&.
+.SH "OPTIONS"
+.PP
+\fB\-D, \-\-nodaemonize\fR
+.RS 4
+This option instructs
+\fBanytun\-controld\fR
+to run in foreground instead of becoming a daemon which is the default\&.
+.RE
+.PP
+\fB\-u, \-\-username <username>\fR
+.RS 4
+run as this user\&. If no group is specified (\fB\-g\fR) the default group of the user is used\&. The default is to not drop privileges\&.
+.RE
+.PP
+\fB\-g, \-\-groupname <groupname>\fR
+.RS 4
+run as this group\&. If no username is specified (\fB\-u\fR) this gets ignored\&. The default is to not drop privileges\&.
+.RE
+.PP
+\fB\-C, \-\-chroot <path>\fR
+.RS 4
+Instruct
+\fBanytun\-controld\fR
+to run in a chroot jail\&. The default is to not run in chroot\&.
+.RE
+.PP
+\fB\-P, \-\-write\-pid <filename>\fR
+.RS 4
+Instruct
+\fBanytun\-controld\fR
+to write it\(cqs pid to this file\&. The default is to not create a pid file\&.
+.RE
+.PP
+\fB\-L, \-\-log <target>:<level>[,<param1>[,<param2>[\&.\&.]]]\fR
+.RS 4
+add log target to logging system\&. This can be invoked several times in order to log to different targets at the same time\&. Every target hast its own log level which is a number between 0 and 5\&. Where 0 means disabling log and 5 means debug messages are enabled\&.
+
+The file target can be used more the once with different levels\&. If no target is provided at the command line a single target with the config
+\fBsyslog:3,anytun\-controld,daemon\fR
+is added\&.
+
+The following targets are supported:
+.PP
+\fBsyslog\fR
+.RS 4
+log to syslog daemon, parameters <level>[,<logname>[,<facility>]]
+.RE
+.PP
+\fBfile\fR
+.RS 4
+log to file, parameters <level>[,<path>]
+.RE
+.PP
+\fBstdout\fR
+.RS 4
+log to standard output, parameters <level>
+.RE
+.PP
+\fBstderr\fR
+.RS 4
+log to standard error, parameters <level>
+.RE
+.RE
+.PP
+\fB\-f, \-\-file <path>\fR
+.RS 4
+The path to the file which holds the sync information\&.
+.RE
+.PP
+\fB\-X, \-\-control\-host <hostname|ip>[:<port>]\fR
+.RS 4
+fetch the config from this host\&. The default is not to use a control host and therefore this is empty\&. Mind that the port can be omitted in which case port 2323 is used\&. If you want to specify an ipv6 address and a port you have to use [ and ] to seperate the address from the port, eg\&.: [::1]:1234\&. If you want to use the default port [ and ] can be omitted\&.
+.RE
+.SH "BUGS"
+.sp
+Most likely there are some bugs in \fBAnytun\fR\&. If you find a bug, please let the developers know at satp@anytun\&.org\&. Of course, patches are preferred\&.
+.SH "SEE ALSO"
+.sp
+anytun(8), anytun\-config(8), anytun\-showtables(8)
+.SH "AUTHORS"
+.sp
+Othmar Gsenger <otti@anytun\&.org> Erwin Nindl <nine@anytun\&.org> Christian Pointner <equinox@anytun\&.org>
+.SH "RESOURCES"
+.sp
+Main web site: http://www\&.anytun\&.org/
+.SH "COPYING"
+.sp
+Copyright (C) 2007\-2009 Othmar Gsenger, Erwin Nindl and Christian Pointner\&. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or any later version\&.
--- /dev/null
+'\" t
+.\" Title: anytun-showtables
+.\" Author: [see the "AUTHORS" section]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\" Date: 12/14/2009
+.\" Manual: anytun-showtables user manual
+.\" Source: anytun 0.3.2
+.\" Language: English
+.\"
+.TH "ANYTUN\-SHOWTABLES" "8" "12/14/2009" "anytun 0.3.2" "anytun-showtables user manual"
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+anytun-showtables \- anycast tunneling routing table visualization utility
+.SH "SYNOPSIS"
+.sp
+.nf
+\fBanytun\-showtables\fR
+.fi
+.SH "DESCRIPTION"
+.sp
+\fBanytun\-showtables\fR displays routing and connection tables used by \fBAnytun\fR\&. It can be used to display a saved routing/connection table used by \fBanytun\-controld\fR or to connect to a the sync port of \fBAnytun\fR\&.
+.SH "OPTIONS"
+.sp
+This Tool does not take any options\&. It takes the sync information from the standard input and prints the routing table to the standard output\&.
+.SH "EXAMPLES"
+.sp
+Print routing table stored in local file
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+# perl \-ne \'chomp; print\' < routingtable | \&./anytun\-showtables
+.fi
+.if n \{\
+.RE
+.\}
+.sp
+Print current routing table and watch changes
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+# nc unicast1\&.anycast\&.anytun\&.org 23 | \&./anytun\-showtables
+.fi
+.if n \{\
+.RE
+.\}
+.SH "BUGS"
+.sp
+Most likely there are some bugs in \fBAnytun\fR\&. If you find a bug, please let the developers know at satp@anytun\&.org\&. Of course, patches are preferred\&.
+.SH "SEE ALSO"
+.sp
+anytun(8), anytun\-controld(8), anytun\-config(8)
+.SH "AUTHORS"
+.sp
+Othmar Gsenger <otti@anytun\&.org> Erwin Nindl <nine@anytun\&.org> Christian Pointner <equinox@anytun\&.org>
+.SH "RESOURCES"
+.sp
+Main web site: http://www\&.anytun\&.org/
+.SH "COPYING"
+.sp
+Copyright (C) 2007\-2009 Othmar Gsenger, Erwin Nindl and Christian Pointner\&. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or any later version\&.
--- /dev/null
+'\" t
+.\" Title: anytun
+.\" Author: [see the "AUTHORS" section]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\" Date: 12/14/2009
+.\" Manual: anytun user manual
+.\" Source: anytun 0.3.2
+.\" Language: English
+.\"
+.TH "ANYTUN" "8" "12/14/2009" "anytun 0.3.2" "anytun user manual"
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+anytun \- anycast tunneling daemon
+.SH "SYNOPSIS"
+.sp
+.nf
+\fBanytun\fR
+ [ \fB\-h|\-\-help\fR ]
+ [ \fB\-D|\-\-nodaemonize\fR ]
+ [ \fB\-u|\-\-username\fR <username> ]
+ [ \fB\-g|\-\-groupname\fR <groupname> ]
+ [ \fB\-C|\-\-chroot\fR <path> ]
+ [ \fB\-P|\-\-write\-pid\fR <filename> ]
+ [ \fB\-L|\-\-log\fR <target>:<level>[,<param1>[,<param2>[\&.\&.]]] ]
+ [ \fB\-i|\-\-interface\fR <ip\-address> ]
+ [ \fB\-p|\-\-port\fR <port> ]
+ [ \fB\-r|\-\-remote\-host\fR <hostname|ip> ]
+ [ \fB\-o|\-\-remote\-port\fR <port> ]
+ [ \fB\-4|\-\-ipv4\-only\fR ]
+ [ \fB\-6|\-\-ipv6\-only\fR ]
+ [ \fB\-I|\-\-sync\-interface\fR <ip\-address> ]
+ [ \fB\-S|\-\-sync\-port\fR port> ]
+ [ \fB\-M|\-\-sync\-hosts\fR <hostname|ip>[:<port>][,<hostname|ip>[:<port>][\&.\&.\&.]] ]
+ [ \fB\-X|\-\-control\-host\fR <hostname|ip>[:<port>]
+ [ \fB\-d|\-\-dev\fR <name> ]
+ [ \fB\-t|\-\-type\fR <tun|tap> ]
+ [ \fB\-n|\-\-ifconfig\fR <local>/<prefix> ]
+ [ \fB\-x|\-\-post\-up\-script\fR <script> ]
+ [ \fB\-R|\-\-route\fR <net>/<prefix length> ]
+ [ \fB\-m|\-\-mux\fR <mux\-id> ]
+ [ \fB\-s|\-\-sender\-id\fR <sender id> ]
+ [ \fB\-w|\-\-window\-size\fR <window size> ]
+ [ \fB\-k|\-\-kd\-prf\fR <kd\-prf type> ]
+ [ \fB\-e|\-\-role\fR <role> ]
+ [ \fB\-E|\-\-passphrase\fR <pass phrase> ]
+ [ \fB\-K|\-\-key\fR <master key> ]
+ [ \fB\-A|\-\-salt\fR <master salt> ]
+ [ \fB\-c|\-\-cipher\fR <cipher type> ]
+ [ \fB\-a|\-\-auth\-algo\fR <algo type> ]
+ [ \fB\-b|\-\-auth\-tag\-length\fR <length> ]
+.fi
+.SH "DESCRIPTION"
+.sp
+\fBAnytun\fR is an implementation of the Secure Anycast Tunneling Protocol (SATP)\&. It provides a complete VPN solution similar to OpenVPN or IPsec in tunnel mode\&. The main difference is that anycast allows a setup of tunnels between an arbitrary combination of anycast, unicast and multicast hosts\&.
+.SH "OPTIONS"
+.sp
+\fBAnytun\fR has been designed as a peer to peer application, so there is no difference between client and server\&. The following options can be passed to the daemon:
+.PP
+\fB\-D, \-\-nodaemonize\fR
+.RS 4
+This option instructs
+\fBAnytun\fR
+to run in foreground instead of becoming a daemon which is the default\&.
+.RE
+.PP
+\fB\-u, \-\-username <username>\fR
+.RS 4
+run as this user\&. If no group is specified (\fB\-g\fR) the default group of the user is used\&. The default is to not drop privileges\&.
+.RE
+.PP
+\fB\-g, \-\-groupname <groupname>\fR
+.RS 4
+run as this group\&. If no username is specified (\fB\-u\fR) this gets ignored\&. The default is to not drop privileges\&.
+.RE
+.PP
+\fB\-C, \-\-chroot <path>\fR
+.RS 4
+Instruct
+\fBAnytun\fR
+to run in a chroot jail\&. The default is to not run in chroot\&.
+.RE
+.PP
+\fB\-P, \-\-write\-pid <filename>\fR
+.RS 4
+Instruct
+\fBAnytun\fR
+to write it\(cqs pid to this file\&. The default is to not create a pid file\&.
+.RE
+.PP
+\fB\-L, \-\-log <target>:<level>[,<param1>[,<param2>[\&.\&.]]]\fR
+.RS 4
+add log target to logging system\&. This can be invoked several times in order to log to different targets at the same time\&. Every target hast its own log level which is a number between 0 and 5\&. Where 0 means disabling log and 5 means debug messages are enabled\&.
+
+The file target can be used more the once with different levels\&. If no target is provided at the command line a single target with the config
+\fBsyslog:3,anytun,daemon\fR
+is added\&.
+
+The following targets are supported:
+.PP
+\fBsyslog\fR
+.RS 4
+log to syslog daemon, parameters <level>[,<logname>[,<facility>]]
+.RE
+.PP
+\fBfile\fR
+.RS 4
+log to file, parameters <level>[,<path>]
+.RE
+.PP
+\fBstdout\fR
+.RS 4
+log to standard output, parameters <level>
+.RE
+.PP
+\fBstderr\fR
+.RS 4
+log to standard error, parameters <level>
+.RE
+.RE
+.PP
+\fB\-i, \-\-interface <ip address>\fR
+.RS 4
+This IP address is used as the sender address for outgoing packets\&. In case of anycast tunnel endpoints, the anycast IP has to be used\&. In case of unicast endpoints, the address is usually derived correctly from the routing table\&. The default is to not use a special inteface and just bind on all interfaces\&.
+.RE
+.PP
+\fB\-p, \-\-port <port>\fR
+.RS 4
+The local UDP port that is used to send and receive the payload data\&. The two tunnel endpoints can use different ports\&. If a tunnel endpoint consists of multiple anycast hosts, all hosts have to use the same port\&. default: 4444
+.RE
+.PP
+\fB\-r, \-\-remote\-host <hostname|ip>\fR
+.RS 4
+This option can be used to specify the remote tunnel endpoint\&. In case of anycast tunnel endpoints, the anycast IP address has to be used\&. If you do not specify an address, it is automatically determined after receiving the first data packet\&.
+.RE
+.PP
+\fB\-o, \-\-remote\-port <port>\fR
+.RS 4
+The UDP port used for payload data by the remote host (specified with \-p on the remote host)\&. If you do not specify a port, it is automatically determined after receiving the first data packet\&.
+.RE
+.PP
+\fB\-4, \-\-ipv4\-only\fR
+.RS 4
+Resolv to IPv4 addresses only\&. The default is to resolv both IPv4 and IPv6 addresses\&.
+.RE
+.PP
+\fB\-6, \-\-ipv6\-only\fR
+.RS 4
+Resolv to IPv6 addresses only\&. The default is to resolv both IPv4 and IPv6 addresses\&.
+.RE
+.PP
+\fB\-I, \-\-sync\-interface <ip\-address>\fR
+.RS 4
+local unicast(sync) ip address to bind to
+
+This option is only needed for tunnel endpoints consisting of multiple anycast hosts\&. The unicast IP address of the anycast host can be used here\&. This is needed for communication with the other anycast hosts\&. The default is to not use a special inteface and just bind on all interfaces\&. However this is only the case if synchronisation is active see
+\fB\-\-sync\-port\fR\&.
+.RE
+.PP
+\fB\-S, \-\-sync\-port <port>\fR
+.RS 4
+local unicast(sync) port to bind to
+
+This option is only needed for tunnel endpoints consisting of multiple anycast hosts\&. This port is used by anycast hosts to synchronize information about tunnel endpoints\&. No payload data is transmitted via this port\&. By default the synchronisation is disabled an therefore the port is kept empty\&.
+
+It is possible to obtain a list of active connections by telnetting into this port\&. This port is read\-only and unprotected by default\&. It is advised to protect this port using firewall rules and, eventually, IPsec\&.
+.RE
+.PP
+\fB\-M, \-\-sync\-hosts <hostname|ip>[:<port>],[<hostname|ip>[:<port>][\&...]]\fR
+.RS 4
+remote hosts to sync with
+
+This option is only needed for tunnel endpoints consisting of multiple anycast hosts\&. Here, one has to specify all unicast IP addresses of all other anycast hosts that comprise the anycast tunnel endpoint\&. By default synchronisation is disabled and therefore this is empty\&. Mind that the port can be omitted in which case port 2323 is used\&. If you want to specify an ipv6 address and a port you have to use [ and ] to seperate the address from the port, eg\&.: [::1]:1234\&. If you want to use the default port [ and ] can be omitted\&.
+.RE
+.PP
+\fB\-X, \-\-control\-host <hostname|ip>[:<port>]\fR
+.RS 4
+fetch the config from this host\&. The default is not to use a control host and therefore this is empty\&. Mind that the port can be omitted in which case port 2323 is used\&. If you want to specify an ipv6 address and a port you have to use [ and ] to seperate the address from the port, eg\&.: [::1]:1234\&. If you want to use the default port [ and ] can be omitted\&.
+.RE
+.PP
+\fB\-d, \-\-dev <name>\fR
+.RS 4
+device name
+
+By default, tapN is used for Ethernet tunnel interfaces, and tunN for IP tunnels, respectively\&. This option can be used to manually override these defaults\&.
+.RE
+.PP
+\fB\-t, \-\-type <tun|tap>\fR
+.RS 4
+device type
+
+Type of the tunnels to create\&. Use tap for Ethernet tunnels, tun for IP tunnels\&.
+.RE
+.PP
+\fB\-n, \-\-ifconfig <local>/<prefix>\fR
+.RS 4
+The local IP address and prefix length\&. The remote tunnel endpoint has to use a different IP address in the same subnet\&.
+.PP
+\fB<local>\fR
+.RS 4
+the local IP address for the tun/tap device
+.RE
+.PP
+\fB<prefix>\fR
+.RS 4
+the prefix length of the network
+.RE
+.RE
+.PP
+\fB\-x, \-\-post\-up\-script <script>\fR
+.RS 4
+This option instructs
+\fBAnytun\fR
+to run this script after the interface is created\&. By default no script will be executed\&.
+.RE
+.PP
+\fB\-R, \-\-route <net>/<prefix length>\fR
+.RS 4
+add a route to connection\&. This can be invoked several times\&.
+.RE
+.PP
+\fB\-m, \-\-mux <mux\-id>\fR
+.RS 4
+the multiplex id to use\&. default: 0
+.RE
+.PP
+\fB\-s, \-\-sender\-id <sender id>\fR
+.RS 4
+Each anycast tunnel endpoint needs a uniqe sender id (1, 2, 3, \&...)\&. It is needed to distinguish the senders in case of replay attacks\&. This option can be ignored on unicast endpoints\&. default: 0
+.RE
+.PP
+\fB\-w, \-\-window\-size <window size>\fR
+.RS 4
+seqence window size
+
+Sometimes, packets arrive out of order on the receiver side\&. This option defines the size of a list of received packets\' sequence numbers\&. If, according to this list, a received packet has been previously received or has been transmitted in the past, and is therefore not in the list anymore, this is interpreted as a replay attack and the packet is dropped\&. A value of 0 deactivates this list and, as a consequence, the replay protection employed by filtering packets according to their secuence number\&. By default the sequence window is disabled and therefore a window size of 0 is used\&.
+.RE
+.PP
+\fB\-k, \-\-kd\(emprf <kd\-prf type>\fR
+.RS 4
+key derivation pseudo random function
+
+The pseudo random function which is used for calculating the session keys and session salt\&.
+
+Possible values:
+.PP
+\fBnull\fR
+.RS 4
+no random function, keys and salt are set to 0\&.\&.00
+.RE
+.PP
+\fBaes\-ctr\fR
+.RS 4
+AES in counter mode with 128 Bits, default value
+.RE
+.PP
+\fBaes\-ctr\-128\fR
+.RS 4
+AES in counter mode with 128 Bits
+.RE
+.PP
+\fBaes\-ctr\-192\fR
+.RS 4
+AES in counter mode with 192 Bits
+.RE
+.PP
+\fBaes\-ctr\-256\fR
+.RS 4
+AES in counter mode with 256 Bits
+.RE
+.RE
+.PP
+\fB\-e, \-\-role <role>\fR
+.RS 4
+SATP uses different session keys for inbound and outbound traffic\&. The role parameter is used to determine which keys to use for outbound or inbound packets\&. On both sides of a vpn connection different roles have to be used\&. Possible values are
+\fBleft\fR
+and
+\fBright\fR\&. You may also use
+\fBalice\fR
+or
+\fBserver\fR
+as a replacement for
+\fBleft\fR
+and
+\fBbob\fR
+or
+\fBclient\fR
+as a replacement for
+\fBright\fR\&. By default
+\fBleft\fR
+is used\&.
+.RE
+.PP
+\fB\-E, \-\-passphrase <pass phrase>\fR
+.RS 4
+This passphrase is used to generate the master key and master salt\&. For the master key the last n bits of the SHA256 digest of the passphrase (where n is the length of the master key in bits) is used\&. The master salt gets generated with the SHA1 digest\&. You may force a specific key and or salt by using
+\fB\-\-key\fR
+and
+\fB\-\-salt\fR\&.
+.RE
+.PP
+\fB\-K, \-\-key <master key>\fR
+.RS 4
+master key to use for key derivation
+
+Master key in hexadecimal notation, e\&.g\&. 01a2b3c4d5e6f708a9b0cadbecfd0fa1, with a mandatory length of 32, 48 or 64 characters (128, 192 or 256 bits)\&.
+.RE
+.PP
+\fB\-A, \-\-salt <master salt>\fR
+.RS 4
+master salt to use for key derivation
+
+Master salt in hexadecimal notation, e\&.g\&. 01a2b3c4d5e6f708a9b0cadbecfd, with a mandatory length of 28 characters (14 bytes)\&.
+.RE
+.PP
+\fB\-c, \-\-cipher <cipher type>\fR
+.RS 4
+payload encryption algorithm
+
+Encryption algorithm used for encrypting the payload
+
+Possible values:
+.PP
+\fBnull\fR
+.RS 4
+no encryption
+.RE
+.PP
+\fBaes\-ctr\fR
+.RS 4
+AES in counter mode with 128 Bits, default value
+.RE
+.PP
+\fBaes\-ctr\-128\fR
+.RS 4
+AES in counter mode with 128 Bits
+.RE
+.PP
+\fBaes\-ctr\-192\fR
+.RS 4
+AES in counter mode with 192 Bits
+.RE
+.PP
+\fBaes\-ctr\-256\fR
+.RS 4
+AES in counter mode with 256 Bits
+.RE
+.RE
+.PP
+\fB\-a, \-\-auth\-algo <algo type>\fR
+.RS 4
+message authentication algorithm
+
+This option sets the message authentication algorithm\&.
+
+If HMAC\-SHA1 is used, the packet length is increased\&. The additional bytes contain the authentication data\&. see
+\fB\-\-auth\-tag\-length\fR
+for more info\&.
+
+Possible values:
+.PP
+\fBnull\fR
+.RS 4
+no message authentication
+.RE
+.PP
+\fBsha1\fR
+.RS 4
+HMAC\-SHA1, default value
+.RE
+.RE
+.PP
+\fB\-b, \-\-auth\-tag\-length <length>\fR
+.RS 4
+The number of bytes to use for the auth tag\&. This value defaults to 10 bytes unless the
+\fBnull\fR
+auth algo is used in which case it defaults to 0\&.
+.RE
+.SH "EXAMPLES"
+.SS "P2P Setup between two unicast enpoints:"
+.sp
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.ps +1
+\fBHost A:\fR
+.RS 4
+.sp
+anytun \-r hostb\&.example\&.com \-t tun \-n 192\&.168\&.123\&.1/30 \-c aes\-ctr\-256 \-k aes\-ctr\-256 \e \-E have_a_very_safe_and_productive_day \-e left
+.RE
+.sp
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.ps +1
+\fBHost B:\fR
+.RS 4
+.sp
+anytun \-r hosta\&.example\&.com \-t tun \-n 192\&.168\&.123\&.2/30 \-c aes\-ctr\-256 \-k aes\-ctr\-256 \e \-E have_a_very_safe_and_productive_day \-e right
+.RE
+.SS "One unicast and one anycast tunnel endpoint:"
+.sp
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.ps +1
+\fBUnicast tunnel endpoint:\fR
+.RS 4
+.sp
+anytun \-r anycast\&.anytun\&.org \-d anytun0 \-t tun \-n 192\&.0\&.2\&.2/30 \-a null \-c null \-w 0 \-e client
+.RE
+.sp
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.ps +1
+\fBAnycast tunnel endpoints:\fR
+.RS 4
+.sp
+On the host with unicast hostname unicast1\&.anycast\&.anytun\&.org and anycast hostname anycast\&.anytun\&.org:
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+# anytun \-i anycast\&.anytun\&.org \-d anytun0 \-t tun \-n 192\&.0\&.2\&.1/30 \-a null \-c null \-w 0 \-e server \e
+ \-S 2342 \-M unicast2\&.anycast\&.anytun\&.org:2342,unicast3\&.anycast\&.anytun\&.org:2342
+.fi
+.if n \{\
+.RE
+.\}
+.sp
+On the host with unicast hostname unicast2\&.anycast\&.anytun\&.org and anycast hostname anycast\&.anytun\&.org:
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+# anytun \-i anycast\&.anytun\&.org \-d anytun0 \-t tun \-n 192\&.0\&.2\&.1/30 \-a null \-c null \-w 0 \-e server \e
+ \-S 2342 \-M unicast1\&.anycast\&.anytun\&.org:2342,unicast3\&.anycast\&.anytun\&.org:2342
+.fi
+.if n \{\
+.RE
+.\}
+.sp
+On the host with unicast hostname unicast3\&.anycast\&.anytun\&.org and anycast hostname anycast\&.anytun\&.org:
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+# anytun \-i anycast\&.anytun\&.org \-d anytun0 \-t tun \-n 192\&.0\&.2\&.1/30 \-a null \-c null \-w 0 \-e server \e
+ \-S 2342 \-M unicast1\&.anycast\&.anytun\&.org:2342,unicast2\&.anycast\&.anytun\&.org:2342
+.fi
+.if n \{\
+.RE
+.\}
+.sp
+For more sophisticated examples (like multiple unicast endpoints to one anycast tunnel endpoint) please consult the man page of anytun\-config(8)\&.
+.RE
+.SH "BUGS"
+.sp
+Most likely there are some bugs in \fBAnytun\fR\&. If you find a bug, please let the developers know at satp@anytun\&.org\&. Of course, patches are preferred\&.
+.SH "SEE ALSO"
+.sp
+anytun\-config(8), anytun\-controld(8), anytun\-showtables(8)
+.SH "AUTHORS"
+.sp
+Othmar Gsenger <otti@anytun\&.org> Erwin Nindl <nine@anytun\&.org> Christian Pointner <equinox@anytun\&.org>
+.SH "RESOURCES"
+.sp
+Main web site: http://www\&.anytun\&.org/
+.SH "COPYING"
+.sp
+Copyright (C) 2007\-2009 Othmar Gsenger, Erwin Nindl and Christian Pointner\&. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or any later version\&.
Section: net
Priority: extra
Maintainer: Michael Prokop <mika@debian.org>
-Build-Depends: debhelper (>= 5), asciidoc, autotools-dev, docbook-xsl, libgcrypt11-dev, libboost-regex1.40-dev, libboost-serialization1.40-dev, libboost-system1.40-dev, libboost-thread1.40-dev, xsltproc
+Build-Depends: debhelper (>= 5), autotools-dev, libgcrypt11-dev, libboost-regex1.40-dev, libboost-serialization1.40-dev, libboost-system1.40-dev, libboost-thread1.40-dev
Homepage: http://www.anytun.org/
Vcs-git: git://git.grml.org/anytun.git
Vcs-Browser: http://git.grml.org/?p=anytun.git
configure: configure-stamp
configure-stamp:
dh_testdir
- cd src && ./configure --prefix=/usr --sysconfdir=/etc --examplesdir=/usr/share/anytun/examples && cd ..
+ cd src && ./configure --no-manpage --prefix=/usr --sysconfdir=/etc --examplesdir=/usr/share/anytun/examples && cd ..
touch configure-stamp
build: build-stamp
dh_testroot
rm -f build-stamp configure-stamp
- cd src && $(MAKE) distclean && cd ..
-
- # drop leftover file:
- rm -f src/tun.c
-
# Add here commands to clean up after the build process.
$(MAKE) --directory=$(CURDIR)/src distclean
dh_clean
dh_testroot
dh_installchangelogs ChangeLog
dh_installdocs
+ dh_installman debian/anytun.8 debian/anytun-config.8 debian/anytun-controld.8 debian/anytun-showtables.8
dh_installexamples
dh_installinit
dh_link
projects / anytun.git / commitdiff