--- /dev/null
+uanytun (0.3.3-1) unstable; urgency=low
+
+ * New upstream release.
+ * Bump Standards-Version to 3.8.4 (no further changes).
+ * Add $remote_fs to Required-{Start,Stop} in initscript.
+
+ -- Michael Prokop <mika@debian.org> Wed, 17 Feb 2010 03:10:04 +0100
+
+uanytun (0.3.2-2) unstable; urgency=low
+
+ * Drop asciidoc and related packages from build-depends and ship
+ manpage statically instead. Upstream will ship manpage in
+ next release through the tarball.
+ * Apply patch based on the one from Cyril Brulebois for anytun to fix
+ FTBFS on GNU/kFreeBSD.
+
+ -- Michael Prokop <mika@debian.org> Wed, 23 Dec 2009 03:50:43 +0100
+
+uanytun (0.3.2-1) unstable; urgency=low
+
+ * Initial release (Closes: #531082)
+
+ -- Michael Prokop <mika@debian.org> Mon, 14 Dec 2009 17:43:13 +0100
+
--- /dev/null
+Source: uanytun
+Section: net
+Priority: extra
+Maintainer: Michael Prokop <mika@debian.org>
+Build-Depends: debhelper (>= 5), libgcrypt11-dev
+Standards-Version: 3.8.4
+Homepage: http://www.anytun.org/
+Vcs-git: git://git.grml.org/uanytun.git
+Vcs-Browser: http://git.grml.org/?p=uanytun.git
+
+Package: uanytun
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, adduser
+Description: tiny implementation of the secure anycast tunneling protocol
+ uAnytun is a tiny implementation of SATP (Secure Anycast Tunneling
+ Protocol). Unlike Anytun which is a full featured implementation
+ uAnytun has no support for multiple connections or synchronisation.
+ It is a small single threaded implementation intended to act as a
+ client on small platforms. SATP defines a protocol used for
+ communication between any combination of unicast and anycast tunnel
+ endpoints. It has less protocol overhead than IPSec in Tunnel mode
+ and allows tunneling of every ETHER TYPE protocol (e.g. ethernet,
+ ip, arp ...). SATP directly includes cryptography and message
+ authentication based on the methodes used by SRTP (Secure Real-time
+ Transport Protocol). It is intended to deliver a generic,
+ scaleable and secure solution for tunneling and relaying of packets
+ of any protocol.
--- /dev/null
+This package was debianized by Michael Prokop <mika@debian.org> on
+Fri, 29 May 2009 11:23:42 +0200.
+
+It was downloaded from <http://www.anytun.org/>
+
+Upstream Author: Christian Pointner <equinox@anytun.org>
+
+Copyright: 2007-2009 Christian Pointner
+
+License:
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this package; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL-3'.
+
+The Debian packaging is © 2009, Michael Prokop <mika@debian.org> and
+is licensed under the GPL, see above.
--- /dev/null
+uanytun: non-standard-file-perm usr/share/uanytun/examples/config/client1/config 0600 != 0644
+uanytun: non-standard-file-perm usr/share/uanytun/examples/config/client2/config 0600 != 0644
+uanytun: non-standard-file-perm usr/share/uanytun/examples/config/client3/config 0600 != 0644
+uanytun: non-standard-file-perm usr/share/uanytun/examples/config/p2p-a/config 0600 != 0644
+uanytun: non-standard-file-perm usr/share/uanytun/examples/config/p2p-b/config 0600 != 0644
--- /dev/null
+#!/bin/sh
+# postinst script for uanytun
+
+set -e
+
+if [ -x "/etc/init.d/uanytun" ]; then
+ update-rc.d uanytun defaults >/dev/null
+fi
+
+if [ "$1" = "configure" ]; then
+ adduser --quiet --system --group --no-create-home --home /var/run/uanytun uanytun
+fi
--- /dev/null
+#!/bin/sh
+# postrm script for uanytun
+
+set -e
+
+if [ "$1" = "purge" ] ; then
+ update-rc.d uanytun remove >/dev/null || exit $?
+
+ if [ -x "$(command -v deluser)" -a -x "$(command -v delgroup)" ]; then
+ deluser --quiet --system uanytun || true
+ delgroup --quiet --system uanytun || true
+ else
+ echo "Not removing uanytun user and group: adduser package not found." >&2
+ fi
+fi
--- /dev/null
+#!/bin/sh
+# prerm script for uanytun
+
+set -e
+
+if [ -x "/etc/init.d/uanytun" ] && [ "$1" = remove ]; then
+ if [ -x "`which invoke-rc.d 2>/dev/null`" ]; then
+ invoke-rc.d uanytun stop || true
+ else
+ /etc/init.d/uanytun stop || true
+ fi
+fi
--- /dev/null
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+configure: configure-stamp
+configure-stamp:
+ dh_testdir
+ cd src && ./configure --no-manpage --prefix=/usr --sysconfdir=/etc --examplesdir=/usr/share/uanytun/examples && cd ..
+ touch configure-stamp
+
+build: build-stamp
+
+build-stamp: configure-stamp
+ dh_testdir
+
+ cd src && $(MAKE) && cd ..
+
+ touch $@
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp configure-stamp
+
+ # Add here commands to clean up after the build process.
+ $(MAKE) --directory=$(CURDIR)/src distclean
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_installdirs
+
+ # Add here commands to install the package into debian/uanytun.
+ cd src && $(MAKE) DESTDIR=$(CURDIR)/debian/uanytun install && cd ..
+ # Fix unusual path:
+ mv debian/uanytun/usr/share/uanytun/examples/uanytun debian/uanytun/usr/share/uanytun/examples/config
+ echo "example configurations can be found at /usr/share/uanytun/examples/config" > debian/uanytun/etc/uanytun/README
+
+# Build architecture-independent files here.
+binary-indep: install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: install
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs ChangeLog
+ dh_installdocs
+ dh_installexamples
+ dh_installinit
+ dh_installman doc/uanytun.8
+ dh_link
+ dh_strip
+ dh_compress
+ mkdir -p debian/uanytun/usr/share/lintian/overrides/
+ cp -av debian/overrides debian/uanytun/usr/share/lintian/overrides/uanytun
+ dh_fixperms
+ find debian/uanytun -type f -name config -exec chmod 600 {} \;
+ find debian/uanytun -type f -name post-up.sh -exec chmod 755 {} \;
+ dh_installdeb
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure
--- /dev/null
+# Defaults for uanytun initscript
+# sourced by /etc/init.d/uanytun
+
+# Additional options that are passed to the Daemon.
+DAEMONOPTS="--username uanytun"
projects / debian / uanytun.git / commitdiff